Knowledgebase
Next Step Innovation > Next Step Innovation Help Desk > Knowledgebase

Ask a question:


» Category: Phones and Voice Systems  (Go back)

» Articles in this category:

 
Setting time on a NEC DTU-16D-2A phone Article rated 3.7/5.0
To set the time on this phone, you must find the phone on the first port. On each phone, press Feature,4 to list the extension and port. Once you find port 1, do the following: Leave handset down...
Programming feature keys on a NEC Dterm80 phone Article rated 2.8/5.0
Verify that the key is set as a feature key by pressing feature then the line key you are wanting to program. You should see the line key number(ie. if you are programming line key #4 you should see ...
Programming Headset key on NEC Dterm80 phone Article rated 3.2/5.0
First pick the button you want to program. Lets say button 13 in this example. Next check to see if that button is programmed by pressing Feature and that key. If that key says Vacant then it is avail...
Reset voicemail code on a NEC Dterm80 Article rated 2.6/5.0
From an admin phone, enter the voicemail. Then select More, Mgr, ChBox, then enter the ext# you need to reset the password on. Then choose Reset Password (Select Yes when the system asks you if want t...
Set non-answer forwarding on a NEC Dterm80 phone Article rated 3.0/5.0
1. Pick up handset or press speaker 2. Dial the code for call fwd busy/ no answer (default code is 43) or press the forward function key 3. Dial the extension (lead number of your voice mail ) 4....
Addin main number as shared line Article rated 3.0/5.0
Discover the port number for the phone by pressing feature->4 Enter programming mode by typing the sequence "feature->*->0->#->8974" Then select line key #4 then change ...
Programming Feature Access Keys Article rated 3.0/5.0
To program a feature access key you will need to enter the programming section of the phone system, to do this enter #0*8975 once in the programming section press line key #4 then enter 12. At this p...